New Low GWP Non-Flammable R410A Replacement

This will be a short post because I don't know a lot of details yet. Honeywell is developing a new three part zeotropic refrigerant that can replace R410A. It has a relatively low GWP of 733 compared to 2088 for 410A, and most significantly, is non-flammable. Honeywell's trade name for it is Solstice N41, the ASHRAE number is R466A. It reportedly contains the same two chemicals as in R410A (R32 and R125). A third is added - trifluoroiodomethane (CF3I). This third component is currently used a a fire retardant. It also helps reduce the GWP of the mixture. The new refrigerant is not claimed to be a "drop-in" for R410A, but required design modifications are said to be minimal. The refrigerant is currently undergoing ASHRAE testing, but has received a preliminary A1 rating.  I have now told you all I know, and it did not take very long. Here are links to two articles about this new refrigerant.
https://www.coolingpost.com/world-news/secret-of-honeywells-new-refrigerant/
https://www.coolingpost.com/world-news/honeywell-announces-r410a-breakthrough/
 

Air Conditioning Energy Ratings

BTUh, kWh, EER, CEER, SEER, SACC – when it comes to understanding air conditioner capacity and efficiency there are certainly plenty of arcane acronyms to sort through. The systems set up to allow objective comparison of air conditioners are hindering that very goal because of the many different measurement systems and terminology. Before discussing the different terms I would like to quickly explain what an air conditioner does: it pumps out heat. Much like a sump pump pumps out water from a basement or crawl pace, an air conditioner pumps heat out of your house. You need a sump pump that can pump water out as fast as it leaks in, or your basement will flood. With air conditioning, you need one that can pump heat out of your house faster than it leaks in, or your house will still get hot. The key point is that the air conditioner moves heat. In the United States we measure heat in British Thermal Units, or BTUs. The rate at which in air conditioner is able to pump out heat is given in BTUs per hour, or BTUh. This tells us how many BTUs of heat the unit can remove operating for an hour. The air conditioner’s electrical use is measured in kilowatts hours, or kWh.

EER Energy Efficiency Ratio

The EER is the easiest measure to understand. It is the cooling capacity in BTUh divided by the energy use in kWh. It tells you how many BTU of heat removal (cooling) you get for each kWh of energy. However, there are some things not taken into consideration. First is that it is a steady state test, meaning the unit is up and operating at full efficiency before any measurements are taken. No consideration is given for the energy used at startup, shut down, and while plugged in but not running. Also, all measurements are done at design condition, which is 80°F, 50% rh inside and 95°F outside.

   

SEER Seasonal Energy Efficiency Ratio

The Department of Energy devised this measurement for rating central air conditioning units in 1978 to address some of the issues not addressed by EER. Namely, cycling losses and operation at more than one temperature. The idea is that SEER is supposed to show the BTUh/kWh over a season, not just at one steady state condition. To simulate seasonal operation, SEER testing includes cycling and operation at  three different test conditions: 80°db/67°wb inside and 95° outside, 80° db/67°wb inside and 82° outside, and 80°db 57°wb inside and 67° outside. A unit’s SEER is generally higher than its EER because the SEER includes operation at milder conditions. Currently, the minimum SEER in the northern half of the US is 13 while the minimum SEER in the southern half of the US is 14.

CEER Combined Energy Efficiency Ratio

The DOE devised CEER in 2014 specifically for window air conditioning units. CEER is similar to SEER in that it measures efficiency at two operating conditions: 95° and 83°. It also includes the energy used while the unit is plugged in but not operating. A unit’s EER and CEER normally end up being very close to each other with the CEER being slightly lower.

SACC Seasonally Adjusted Cooling Capacity

The SACC was devised in 2017 to measure the efficiency of portable air conditioners. By portable, they mean the ones on wheels where the whole unit sits in the room and an exhaust duct is placed in the window to carry hot condenser air out. It is similar to the CEER in that it measures capacity at both  95° and 83°. It also includes adjustments for heat gains (cooling losses) from the exhaust duct plus loses due to infiltration caused by having to stick the exhaust duct out the window.

How do you convert between these different methods? You don’t because they each have different testing specifications. There are some formulas offered, but they can’t determine the differences in how different units will respond at the varying testing conditions.  The best you can do is understand each rating and use them to compare units with similar ratings. Just as the EPA mileage estimates don’t really tell you what your mileage will be with that new car you just bought, these ratings will not really tell you the energy use for your new air conditioner for a year. So which rating system do I believe is the most reliable? Honestly, the simplest and oldest one: EER.